Plastic composite hose filling and sealing machine made of stainless steel, using the buttons to control the work process: artificial tubes, automatic rotary,quantitative filling, automatically cut off, heating sealing, cut tail, finished exit.

All work using the full cylinder stroke control, easy to adjust filling volume, the filling speed can be adjusted.

It applies to all kinds of plastics and composite hose filling, sealing, date printing, cut tail. Sealing neat appearance, sealing strong, high accuracy, good stability.

Basic parameters of tubes filling sealing machine ultrasonic model YX-UF100B

*Note: The above parameters for reference only. 

The machine constantly upgrades parameters may cause the actual discrepancies, please understand.

How ultrasonic sealing works

The Model YX-UF100A ultrasonic tube sealer is designed to be mounted onto virtually all styles of filling machines. As the tube is advanced to the ultrasonic tube sealing station,

a switch closes to initiate the weld cycle. Air is directed into cylinders to advance the weld anvil and ultrasonic horn towards the center line of the tube.

The tube is closed to a preset gap and held for the applica-tion of sonic energy.

An ultrasonic power supply takes the 50/60 Hz electrical energy and converts it to 30,000 cycles per second thorough a power oscillator.

This high frequency electrical energy is applied to the convertor which transforms the electrical current to high frequency mechanical vibrations.

The sonic energy causes the horn to vibrate against the tube end at 30,000 cycles per second.

The intense vibration disperses any contamination from the seal area and generates heat to bond the material.

The energy is then stopped and the tube is held closed for a brief time (typically .05 to .150 seconds).

Then the tube goes to the next station on the filling line. Typically cycle times range from 45 to 80 units per minute, depending on tube diameter and material.

Product Features from model YX-UF100B horizontal filling ultrasonic tubes filling sealing machine

►The machine can be used for explosion-proof units.

►Mainly used for quantitative filling of water, oil, lotion, paste-like material. According filling needs, adjustable work surface lift.

►Filling volume 5-1000ML, Divided into six series :A, B, C, D, E, F.

►Feeding mode: Normal Gravity / automatic suction type Choose one.

►Control: pneumatic control

Workplace for tubes filling sealing machine semi automatic model YX-UF100B

1.Laboratory

2.Industrial production operations with continuous processing line

Detailed Pictures of filling ultrasonic tubes sealing machine semi automatic model YX-UF100B

Tubes samples of filling sealing machine semi automatic model YX-100B

Wooden case packaging for model YX-UF100B ultrasonic tubes sealing machine +horizontal filling equipment

After-sales service for ultrasonic tubes sealing machine horizontal filling 5-1000ml semi automatic model YX-UF100B

Guarantee: for all the machine, it claims one year for guarantee.(Excluded from the warranty are problems due to accidents,

misuse , misapplication, storage damage, negligence, or modification to the Equipment or its components. 

ALSO THE EASY BROKEN SPARE PART IS NOT INCLUDED IN THE GUARANTEE)

Installation: after the machine arrive your factory,if you need,our technician

 will go to your place to install and 

test the machine and also training your worker to operating the machine

(The time of train depend on you worker).

The expenses (air ticket ,food , hotel,the travelling fee on your country)

 should be on your account and you need paid

for the technician USD50 per day. also you can go to our factory to do training.

After service: If you get the problem on the machine ,our technician will 

go to your place to fixed the machine 

as soon as possible. The cost should be in your account.(as above).

PENGLAI INDUSTRIAL CORPORATION